top of page

i3500 Upgrade to i4500 LMI
For Grove and Shuttlelift Carry Deck Cranes

i4500 Load Moment Indicator LMI
For Grove and Shuttlelift Carry Deck Cranes

i3500 to i4500 2.jpg

The best LMI for your Carry Deck Crane!

​

As Shuttlelift and Grove crane parts become obsolete, it's important to replace them. The now obsolete i3500 display found on the Grove and Shuttlelift carry deck cranes can be upgraded and replaced by the new i4500 display. This is an easy upgrade that only requires a minimal quick calibration. The new i4500 display will show the crane operator the capacity, load, angle, radius, and two-block. With warnings for overload and  A2B.  It monitors all the same information as the original system but in a modern, updated, easy-to-use display.

​

  • 4.3" full color display

  • High resolution LCD screen readable in direct sunlight and with dimmable backlit at night, with accurate color images

  • Large integral memory 2GB (upgradable on request) and processor speed (600/800 MHz)

  • Flexibility to add inputs and outputs on the CANbus network

  • Intelligent computing for self-diagnostic detection of system malfunction

  • Uploading of new information via a USB Stick-No special tools or laptop required with all calibration done from the display screen

  • Display rating up to IP67 and suitable for an indoor or outdoor environment and a temperature range of

  • -20° C to 70°C (-4'F to 158'F). Optional extended temperature of-40° C to 85° C (-40'F to 185'F)

  • Supply voltage 11 to 36 vdc

  • Audible and visual alarms

  • Output connection for lock-out circuit for overload and ATB

  • Self - diagnostic mode with fault log

  • CPU and Display in one unit

 

bottom of page